All field notes

How-to ·

Solution selling examples: one live deal, step by step

Solution selling examples from one B2B deal: the questions, the buyer's answers and the proposal at each step, from finding the pain to agreeing the path.

Solution selling examples show a rep diagnosing the buyer's problem first and only then proposing a fix. Below, one illustrative deal runs through each step, with the questions asked, the buyer's answers and what the rep proposed.

What solution selling asks of a rep

Solution selling asks the rep to diagnose before prescribing. The rep finds the buyer's business problem, puts a cost on it, learns who owns it, and only then matches part of the product to it. In complex B2B sales the work usually takes two to four calls before a proposal, and the rep runs it with the buyer's team, often with a manager checking the diagnosis in a deal review.

The term is generic, and it is also the name of a trademarked training program; our solution selling glossary entry covers the history and the program. Most teams that say they "run solution selling" mean the shared core: pain first, product last. It is one form of consultative selling, with more structure about sizing and ownership.

Most articles list examples from different industries, one line each. That shows what the idea looks like. It does not show a rep where a real deal turns, so this piece follows one deal from the first call to the agreed next step.

How to run solution selling on a live deal

The six steps below are the shared core most solution selling programs teach, written in plain terms.

  1. Find the pain. Ask how the buyer's process works today and where it breaks. Keep asking until the buyer describes what goes wrong, in their words.
  2. Size it. Put a cost on the problem in the buyer's own numbers: hours, money, customers, risk. If they do not know, ask whether they can find out before the next call.
  3. Find who owns it. Learn who feels the problem, who can fund a fix and who signs. These are often three different people.
  4. Build the vision with the buyer. Ask them to describe what fixed looks like, and how they would measure it, before you show anything.
  5. Match the capability. Show only the parts of the product that close the gap the buyer described. Leave the rest for later.
  6. Agree the path. Write down the steps to a decision with owners on both sides, and confirm them in writing after the call.

A rep who jumps to step five on the first call is product selling, however good the demo looks.

One deal, six steps: the Arrowmere example

This example is illustrative. Arrowmere is a 600-person logistics firm with four regional depots. A rep from a yard and dock scheduling software vendor has a first call with the operations manager at the largest depot.

The Arrowmere deal, step by step
  1. 01Find the painTrailers sit at the dock for hours
  2. 02Size itDetention charges every week
  3. 03Find who owns itOps feels it, the COO funds it
  4. 04Build the visionEvery trailer booked into a slot
  5. 05Match the capabilityDock booking only
  6. 06Agree the pathA pilot at one depot

Step 1, find the pain. The rep opens with a process question: "Walk me through what happens when a trailer arrives at the depot." The operations manager explains that carriers turn up when they like, the yard fills by mid-morning, and trailers wait. The rep asks how long. "Some days, three or four hours." That is a problem, described by the buyer, and the rep has said nothing about the product yet.

Step 2, size it. The rep asks what the wait costs. The manager says carriers charge detention after two hours, and the depot pays detention charges every week. He does not know the annual total. The rep asks whether finance could pull it. He agrees to ask before the next call. On the second call he brings the number: detention charges were one of the three largest lines in the depot's overspend last year. He also mentions that in one bad week two drivers nearly ran out of legal driving hours while they waited, a safety risk he had not raised before.

Step 3, find who owns it. The rep asks who else feels it. The depot manager feels it in his budget. The transport director gets the complaints from carriers. Any spend across all four depots goes to the chief operating officer. The rep asks what the COO would need to see. "That it works at one depot first, and that it pays for itself in a year."

Step 4, build the vision. The rep asks what a good day at the dock would look like. The manager describes it: every inbound trailer booked into a slot the day before, no trailer waiting more than an hour, and detention charges close to zero. The rep writes those three measures down in the manager's words and reads them back. They become the success measures for the deal.

Step 5, match the capability. On the third call the rep shows the dock booking calendar and the carrier self-booking link. Nothing else. When the manager asks about the yard map feature, the rep says it exists and offers to cover it after the pilot, because it does not close the gap he described.

Step 6, agree the path. The rep and the manager write a short plan: a six-week pilot at the largest depot, success measured on wait time and detention charges, a review with the transport director at the end, and a business case for the COO if the pilot hits its numbers. Each step has an owner and a date, and the rep sends it the same afternoon.

Look at where the deal turned. It was step 2, when the manager brought back a number he had not known on the first call. Until then, the rep had a complaint. After it, he had a cost the buyer had found himself, which carries more weight with the COO than any figure the rep could bring.

Solution selling examples by step

Short examples help reps hear what each step sounds like. These lines come from the same illustrative deal.

Step Question the rep asked What the buyer said
Find the pain "Walk me through what happens when a trailer arrives." "The yard fills by mid-morning and trailers wait."
Size it "What does the wait cost you?" "Detention charges, every week. I'll get the total."
Find who owns it "Who else feels this, and who signs a fix across all depots?" "The transport director, and the COO signs."
Build the vision "What would a good day at the dock look like?" "Every trailer booked the day before, nobody waiting over an hour."
Match the capability "Here is the booking calendar. Does this close that gap?" "That's the part I need."
Agree the path "Can we write the steps to a decision, with owners?" "Pilot here, review with transport, then the COO."

Where solution selling goes wrong

Three mistakes account for most stalled solution selling deals.

  • The demo comes too early. The rep hears the first sign of a problem and starts presenting. The buyer is polite and the deal goes quiet, because nothing was sized or owned.
  • The pain is never sized. "It's frustrating" is a feeling. Without a cost in the buyer's numbers, the deal has no business case, and the person who signs has no reason to act this quarter.
  • The owner is assumed. The rep sells to the person who feels the problem and never meets the person who funds the fix. A manager can catch this in a review by asking, "Who signs, and what did they say they need to see?"
  • The vision is the rep's. If the success measures come from the product sheet, the buyer will not defend them internally. Use the buyer's words.

Coaching solution selling on live deals

Managers coach this method by listening for order. In a deal review, ask the rep to tell the deal from the start and notice what comes first: the buyer's problem, in the buyer's words, or the demo. Then ask for the number from step 2 and the name from step 3. A rep who can describe every feature shown and cannot give either is product selling.

A second useful check is the buyer's vocabulary. Read the rep's notes or the proposal and count how many of the success measures use words the buyer said. In the Arrowmere deal all three did: booked the day before, nobody waiting over an hour, detention charges close to zero. A proposal written in product language usually means step 4 was skipped, and the buyer will have a harder time selling it to the person who signs.

Reps can also prepare on their own. Before the next call, a rep can talk the deal through with Caty, our AI sales expert for solution selling and other methods, by voice or video on a call, and plan the question that sizes the pain. Our page on coaching your team's method on live deals shows how that works for any method. For how solution selling compares with the other named methods, see the sales methodology guide and solution selling vs consultative selling.

FAQ

What is an example of solution selling?

A rep asks a depot manager how trailers are handled, learns they wait hours and the depot pays detention charges, sizes that cost with finance, and then proposes only dock booking.

What are the steps of solution selling?

The shared core has six steps: find the pain, size it, find who owns it, build the vision with the buyer, match the capability, and agree the path to a decision with owners.

What is the difference between solution selling and product selling?

Solution selling starts from the buyer's problem and its cost, while product selling starts from features and hopes one lands. In solution selling the buyer talks most on the early calls.

When does solution selling not work?

Solution selling fits poorly in fast, low-price sales where the buyer wants a quick answer and the rep has no time to diagnose. It also struggles when a buyer arrives already sure of the answer.

How do you coach solution selling?

Coach it in deal reviews by asking what came first, the buyer's problem or the demo, then asking for the cost and the person who signs. Gaps in either show which step the rep skipped.

Put an expert on your deals.

Talk to Keenan about a live deal for free, or talk to us about experts for your team, your product or your coaching business.

Talk to us